Technologies · Near Venus

Aegis Shield

A superconducting coil in radius, holding station beside the Hesperus Veil just sunward of the Sun-Venus L1 point, from Venus, inflates a magnetic bubble in radius in the solar wind. The wind flows around the bubble, and Venus lies in the sheltered region behind it, so the wind cannot strip away the new air and water. It switches on , before the first ice arrives.

Every number is marked:Physics: Measured, or established physicsPrecedent: Demonstrated in the real world, citedInvented: A breakthrough the plan assumesDesign choice: A size, count or date the plan choosesSelect any number to see how it is computed.

Principle

Why Venus needs a shield

Venus has no magnetic field of its own. The solar wind, a stream of protons ( at at Venus), runs straight into its upper air, picks up ions and carries them away. Earth's field holds the wind off far above the air. At Mars, which has also lost its field, spacecraft have measured the atmosphere being carried off this way (Green et al. 2017). Stripping works slowly, over geological time; Aegis is there so that the oceans and oxygen the plan delivers are still there long after 2036.

How a magnetic bubble works

The solar wind pushes with the pressure of its moving protons, at Venus. A magnetic field pushes back with a pressure that grows with the square of its strength. Where the two balance, the wind turns aside: at . A dipole's field fades with the cube of distance, so to hold that field out the coil needs a dipole moment of , of Earth's.

Why beside the Veil

At the L1 point the pulls of the Sun and Venus balance, so a coil can hold station on the line between them. A bubble there turns the wind aside before it reaches Venus, and behind the bubble a sheltered region, its magnetotail, stretches downstream toward the planet. NASA's 2017 study put its Mars shield at Mars's own L1 point, about as far from Mars as the Veil is from Venus, and planned to strengthen the field until the magnetotail enclosed the whole planet. Aegis takes that design.

Version 2 put the coil beside a Veil hovering out. That Veil could not hover: light pressure and Venus's gravity both push it toward Venus. Version 3 moved the Veil to L1 and the coil with it (corrections).

Hesperus Veil geometrySchematic, not to scale. The Veil sits 1.11 × 10⁶ km sunward of Venus, 100,000 km beyond the L1 point, and must be 13,100 km in radius to put all of Venus in full shadow. Below, the shade areas to scale.L1, 1.01 × 10⁶ km from VenusHesperus Veil: 13,100 km in radius, 5.4 × 10¹⁴ m², 1.11 × 10⁶ km from Venusmargin, 7,100 kmmargin, 7,100 kmVenus's radiusVenus's radiusVenus, radius 6,051.8 kmSunSunradius 695,700 kmradius 695,700 kmHesperus VeilHesperus Veilradius 13,100 kmradius 13,100 km5.4 × 10¹⁴ m²5.4 × 10¹⁴ m²VenusVenusradius 6,051.8 kmradius 6,051.8 kmL1dashed: a shade thereLight pressure (β = 0.0077)Light pressure (β = 0.0077)moves the balance point 100,000 km sunward of L1moves the balance point 100,000 km sunward of L1Umbra: all of the Sun hiddenPenumbra: part of the Sun hiddenPenumbra: part of the Sun hiddenSunlight bound for VenusSunlight bound for VenusL1 to Venus 1.01 × 10⁶ kmVeil to Venus 1.11 × 10⁶ kmSun to Venus 1.08 × 10⁸ kmSchematic: not to scaleShade area needed for full shadow (to scale)Hesperus Veilat its station, 1.11 × 10⁶ km outHesperus Veil: 5.4 × 10¹⁴ m²5.4 × 10¹⁴ m²A shade at L1for comparison onlyA shade at L1: 4.9 × 10¹⁴ m²4.9 × 10¹⁴ m²Version 2 statite137,000 km out; would fall onto VenusVersion 2 statite: 1.5 × 10¹⁴ m²1.5 × 10¹⁴ m²Venus's diskfor scaleVenus's disk: 1.2 × 10¹⁴ m²1.2 × 10¹⁴ m²The Veil is 3.6 times the version 2 statite, which could not have stayed in place.
Where the Veil sits, and how big it must be. Light pressure moves the Veil's balance point 100,000 km sunward of L1, to 1.11 × 10⁶ km from Venus. To hide the whole Sun from every point on Venus it must reach 7,100 km beyond Venus's radius, 5.4 × 10¹⁴ m² in all.View sourceSVG
The data in words

Schematic, not to scale: the Sun, the Veil 1.11 × 10⁶ km sunward of Venus and 100,000 km beyond L1 (1.01 × 10⁶ km from Venus), and Venus. The Veil's umbra, where the whole Sun is hidden, just covers Venus: its radius is Venus's 6,051.8 km plus 7,100 km, 13,100 km in all. The Sun is 1.08 × 10⁸ km away and 695,700 km in radius.

ShadeAreaNote
Hesperus Veil5.4 × 10¹⁴ m²at its station, 1.11 × 10⁶ km out
A shade at L14.9 × 10¹⁴ m²for comparison only
Version 2 statite1.5 × 10¹⁴ m²137,000 km out; would fall onto Venus
Venus's disk1.2 × 10¹⁴ m²for scale

The wind also pushes on the bubble as it would on a sail. Like the light pressure on the Veil, that push moves the coil's balance point a little sunward of L1. How far depends on the coil's mass, which the model does not yet size.

Design

The coil

The coil is a loop in radius wound with turns of superconducting cable, each carrying : in all. The cable runs at , cooled by radiating to space from behind its own small sunshield. Once charged, the current flows without resistance and needs nearly no power to keep running.

Steering the field

The solar wind carries a magnetic field of its own, which turns as the Sun rotates and as storms pass. Where it lies against the bubble's field, the two can link up (reconnection) and let the wind leak in. Green and colleagues proposed keeping the shield's field parallel to the wind's to cut the mass, momentum and energy flowing in. Aegis turns its axis slowly to follow the wind's field.

The coil's own forces: not yet checked

A magnet pulls itself apart. Its field presses outward on its windings with a pressure that grows with the square of the field, and by the virial theorem any magnet needs at least as much structural material as its stored field energy divided by the strength-to-density of that material. For a fixed dipole moment, the stored energy falls steeply as the loop grows, roughly with the cube of its radius, because a wider loop carries the same moment with far less current.

By our estimate the coil's structure would outweigh everything the Foundry ever builds, many times over, whatever it is made of. A much wider loop gives the same bubble at a small fraction of the current, with a structure the Foundry can easily afford. The model does not yet compute the stored energy or the structure, so the specifications below still show version 2's coil. Enlarging it is the expected next correction.

Specifications

ParameterValue
Solar wind at Venus at ,
Field at the bubble's edge
Bubble radius
Dipole moment, of Earth's
Coil radius, ( turns of )
PositionBeside the Veil, sunward
Online

What is invented

Build sequence

  • : Mini-Aegis, a small coil at the Sun-Earth L1 point, must deflect the solar wind without repeated quenches. Pass and kill marks are on the Research Agenda.
  • : The Veil closes near L1. The coil is built at the same station from Foundry parts.
  • : The coil is charged and the bubble inflates.
  • : The first water arrives at Venus, already under the shield.
  • After 2036: Aegis keeps running on its persistent current, for as long as Venus keeps its oceans.

Failure modes and safeguards

  • A quench. If part of the cable warms and stops superconducting, the field collapses and the stored energy becomes heat. Quench protection spreads that heat around the loop so no section burns through. The bubble is down for days while the cable cools and is recharged; Venus loses next to nothing in that time.
  • A solar storm. A gust of denser, faster wind compresses the bubble. Its radius shrinks only as the sixth root of the wind's pressure, so even a strong storm leaves most of the shelter in place.
  • Drifting off station. L1 is unstable, so the coil drifts if left alone. It trims its position continuously, as the Veil's slats do.
  • The magnetotail falls short. Whether the sheltered region still covers Venus, downstream, is the design's main open question. Mini-Aegis tests deflection; the length of the shelter needs simulation, then measurement once the coil is on. A larger bubble is the remedy.

Reproduce these numbers

The Aegis Shield's numbers are in the aegis function of calc/src/model/shield.ts.

pnpm calc --only solar-wind-pressure   # what the bubble must push back
pnpm calc --only aegis-field           # the field that balances it
pnpm calc --only aegis-dipole          # the moment that holds that field at the bubble's edge
pnpm calc --only aegis-ampere-turns    # the current that makes the moment

The Explorer has no Aegis slider; use --set. A bigger bubble (aegis-bubble-radius) needs a dipole that grows with the cube of its radius. A bigger coil (aegis-coil-radius) needs current that falls with the square of its radius: pnpm calc --set aegis-coil-radius=1e6 shows how little current per turn a much wider loop needs.