Technologies · Near Venus

Hesperus Veil

A shade of light-bending slats holds station sunward of Venus, just beyond the Sun-Venus L1 point, and turns away of the sunlight. It is of film weighing , and it closes on . Once Venus is cool it becomes the planet's dimmer switch and day clock.

Every number is marked:Physics: Measured, or established physicsPrecedent: Demonstrated in the real world, citedInvented: A breakthrough the plan assumesDesign choice: A size, count or date the plan choosesSelect any number to see how it is computed.

Hesperus Veil geometrySchematic, not to scale. The Veil sits 1.11 × 10⁶ km sunward of Venus, 100,000 km beyond the L1 point, and must be 13,100 km in radius to put all of Venus in full shadow. Below, the shade areas to scale.L1, 1.01 × 10⁶ km from VenusHesperus Veil: 13,100 km in radius, 5.4 × 10¹⁴ m², 1.11 × 10⁶ km from Venusmargin, 7,100 kmmargin, 7,100 kmVenus's radiusVenus's radiusVenus, radius 6,051.8 kmSunSunradius 695,700 kmradius 695,700 kmHesperus VeilHesperus Veilradius 13,100 kmradius 13,100 km5.4 × 10¹⁴ m²5.4 × 10¹⁴ m²VenusVenusradius 6,051.8 kmradius 6,051.8 kmL1dashed: a shade thereLight pressure (β = 0.0077)Light pressure (β = 0.0077)moves the balance point 100,000 km sunward of L1moves the balance point 100,000 km sunward of L1Umbra: all of the Sun hiddenPenumbra: part of the Sun hiddenPenumbra: part of the Sun hiddenSunlight bound for VenusSunlight bound for VenusL1 to Venus 1.01 × 10⁶ kmVeil to Venus 1.11 × 10⁶ kmSun to Venus 1.08 × 10⁸ kmSchematic: not to scaleShade area needed for full shadow (to scale)Hesperus Veilat its station, 1.11 × 10⁶ km outHesperus Veil: 5.4 × 10¹⁴ m²5.4 × 10¹⁴ m²A shade at L1for comparison onlyA shade at L1: 4.9 × 10¹⁴ m²4.9 × 10¹⁴ m²Version 2 statite137,000 km out; would fall onto VenusVersion 2 statite: 1.5 × 10¹⁴ m²1.5 × 10¹⁴ m²Venus's diskfor scaleVenus's disk: 1.2 × 10¹⁴ m²1.2 × 10¹⁴ m²The Veil is 3.6 times the version 2 statite, which could not have stayed in place.
Where the Veil sits, and how big it must be. Light pressure moves the Veil's balance point 100,000 km sunward of L1, to 1.11 × 10⁶ km from Venus. To hide the whole Sun from every point on Venus it must reach 7,100 km beyond Venus's radius, 5.4 × 10¹⁴ m² in all.View sourceSVG
The data in words

Schematic, not to scale: the Sun, the Veil 1.11 × 10⁶ km sunward of Venus and 100,000 km beyond L1 (1.01 × 10⁶ km from Venus), and Venus. The Veil's umbra, where the whole Sun is hidden, just covers Venus: its radius is Venus's 6,051.8 km plus 7,100 km, 13,100 km in all. The Sun is 1.08 × 10⁸ km away and 695,700 km in radius.

ShadeAreaNote
Hesperus Veil5.4 × 10¹⁴ m²at its station, 1.11 × 10⁶ km out
A shade at L14.9 × 10¹⁴ m²for comparison only
Version 2 statite1.5 × 10¹⁴ m²137,000 km out; would fall onto Venus
Venus's disk1.2 × 10¹⁴ m²for scale

Principle

Venus absorbs sunlight far faster than it can lose heat. Before anything else can work, the sunlight has to stop: the closed Veil turns away . The question is where a shade can sit.

Why a shade cannot hover in front of Venus

Version 2 put the Veil sunward of Venus as a statite: a light sail that hovers instead of orbiting (Forward 1991). A statite works where two forces cancel: light pressure pushing it away from a body, gravity pulling it toward the body. A mirror at Venus feels of light pressure, and that equals Venus's pull at . The magnitudes match. The directions do not.

Sunlight travels outward from the Sun. A shade between the Sun and Venus is pushed the way the light travels: away from the Sun, which is toward Venus. Venus's gravity also pulls the shade toward Venus. The two forces add instead of cancelling. The only thing pulling the shade back sunward is the Sun's tide, the slight excess of the Sun's pull on the shade over its pull on Venus, and at that distance it is tiny. The net is toward Venus: the version 2 Veil would fall onto the planet in about . The model keeps this as a failing check, Version 2: a statite Veil can hover, so the mistake stays visible.

Where a shade can hold station

Work in the frame that turns with Venus around the Sun. A body closer to the Sun than Venus feels a stronger solar pull, so on its own it would orbit faster and drift ahead. Venus's gravity pulls it outward, against the Sun. At one distance the Sun's pull, less Venus's, is exactly what it takes to circle the Sun once per Venus year. There the shade keeps pace with Venus with no thrust at all. That is the L1 point, sunward.

Light pressure acts like a small weakening of the Sun's gravity, by the factor β, light force over solar gravity. Weaker solar pull means the balance moves sunward, away from Venus. A mirror would push the station far out; the Veil is instead a clear film that bends sunlight a few degrees so that it misses Venus, as in Angel's 2006 design for shading Earth. Such a film takes up only about of the light's momentum (a mirror takes 2, a black sheet 1), so β is . The balance point moves from L1 to (Sanchez and McInnes 2015 show the same shift for Earth). The model solves the force balance at that point and finds a residual of (check).

The point is unstable, like a ball on a saddle, but the drift is small and slow. Slats correct it by tilting, which turns their tiny light force slightly. No propellant is needed.

The price of distance

The Sun is not a point. Seen from Venus it is a disk, and to put the whole planet in full shadow the shade must cover that disk as seen from every point on Venus. Its radius has to be Venus's radius plus the distance times the Sun's angular size, R = R_V + x (R_☉ − R_V) / a_V: at the station, Venus's plus of margin. The area is , times the version 2 statite's , and the mass instead of . A shade exactly at L1 would need .

That is the version 3 correction: a shade that can actually stay put, at the cost of more film. The Foundry can afford it by , so the Veil closes later than version 2 planned, on , still well before active cooling begins in .

Design

The slat. Each slat is a square of film on a side, and . Its surface is patterned to bend sunlight a few degrees off the line to Venus. A switchable layer sets how much light it passes straight through, from blocked to open, and changes in seconds. A dielectric stack lets the Exhaust's light through untouched, so the planet's outgoing heat beams pass the Veil.

The swarm. slats fly in formation, each holding its own station by tilting, linked by lasers. Commands from Venus take to arrive, so each slat keeps station on its own and the swarm takes only its settings from the planet.

Shield and coil. The Aegis Shield coil sits beside the Veil, near L1, where NASA's Mars study put its own shield (Green et al. 2017).

Dimmer and day clock. Once the caps are sealed, the Veil opens. Its day setting is , the ratio of sunlight at Earth to sunlight at Venus, so the ground gets Earth-strength light. Because the Veil shades the whole sunlit hemisphere at once, opening and closing it on a cycle gives that hemisphere days and nights. Venus itself turns so slowly that a place stays on its night side for half of each solar day. Lanterns, swarms of mirrors totalling , light the night side in matching pulses. They can hover where the Veil could not: on the night side, light reflected toward Venus pushes the mirrors away from it, the statite balance version 2 wanted, in the one place it works. The model does not yet check the Lanterns' stations.

The Veil stays after 2036 as the planet's thermostat.

Specifications

ParameterValue
Station sunward of Venus, beyond L1's
Radius for full shadow, Venus's plus
Area, times the version 2 statite
Areal density
Mass
Slats, each square and
Light pressure over solar gravity
Sunlight blocked when closed ()
TransmissionSet per slat, from blocked to open
Day mode open for Earth-strength daylight
Light time to Venus
Closes

What is invented

Build sequence

  • : Veil-1 development begins: one slat in orbit that dims on command and holds its attitude.
  • : The cloud-life gate. No Veil goes up unless the survey finds no native life to harm.
  • : Slat production begins on Mercury, as a small diversion from the growing Foundry.
  • : The Foundry can build the whole Veil in one doubling.
  • : The Veil closes over Venus. Building it at this date costs the Foundry of growth.
  • : Active cooling begins under the closed Veil.
  • : The Aegis coil switches on beside it.
  • : The caps are sealed and the Veil opens to its day setting. The air warms to Earth-like temperatures within days.

Failure modes and safeguards

  • Failing open during cooling. Sunlight returning before the CO₂ is sealed would undo the work. Slats fail opaque: a slat that loses power or contact defaults to blocking. The swarm carries spare slats, and each slat is independent, so no single failure opens a hole.
  • Failing open after cooling. Once the caps are sealed, sunlight warms the air but cannot reach the dry ice under its insulation. The cryo-continents are the backstop.
  • Losing station. The station is unstable, so control is continuous. Every slat keeps its own station by tilting, without propellant; a slat that drifts out of formation is retired and replaced.
  • Wear. Thin film degrades in sunlight and is pierced by dust. Veil-1's kill signal is degradation within months; production slats are made to be replaced, from a Foundry that never stops.
  • A harm the plan must not do. The Veil is what kills any native life in the clouds, by cooling them. It waits for the cloud-life gate.

Reproduce these numbers

The Veil's numbers come from calc/src/model/veil.ts, which also keeps the version 2 statite's numbers to show why it fails. The force balance is sunwardBalance in calc/src/physics.ts.

pnpm calc --only veil-v2-net-accel   # light pressure and Venus's gravity, both toward Venus
pnpm calc --only veil-distance       # the force balance with light pressure, sunward of L1
pnpm calc --only veil-area           # full shadow: R_V + x (R_☉ − R_V) / a_V
pnpm calc --only veil-affordable     # when the Foundry can build it

The assumption to try is veil-momentum-fraction, the share of sunlight's momentum the film takes up, in the Explorer. Raise it, toward a mirror, and β grows, the station moves farther sunward, and the radius, area and mass all grow, so the Foundry can afford the Veil later. Push it far enough and the Veil is no longer affordable by its close date. Lower it and the station moves toward L1 and the Veil shrinks toward the L1 area.